Download Hidromek Excavator HMK200C-3A to HMK410LC-3A Operation Manual H34732C401 2025 PDF ( English )

Master safe operation, daily pre-start inspections, and precise hydraulic excavator control features for your fleet with the official Hidromek Excavator HMK200C-3A to HMK410LC-3A Operation Manual (Part Number: H34732C401, 2025 Edition). Delivered in an accessible, high-resolution digital PDF format, this comprehensive operator's guide is tailored for equipment owners, fleet managers, professional operators, and site supervisors who demand clear, authoritative instructions. www.themanualsgroup.com

MODEL COVERED :
Hidromek Tier 3
HMK 200 C-3A, HMK 210 LC-3A, HMK 230 LC-3A, HMK 230 NLC-3A,
HMK 230 LC SLR-3A,HMK 230 LC LR-3A, HMK 310 LC-3A,
HMK 310 LC LR-3A, HMK 360 LC-3A, HMK 390 LC-3A, HMK 390 NLC-3A,
HMK 390 LC LR-3A, HMK 410 LC-3A

CONTENTS INCLUDED :
INTRODUCTION
1.1. FOREWORD
1.2. OCCUPATIONAL SAFETY INFORMATION
1.3. DESCRIPTION AND INTENDED USE
1.4. CE, UKCA MARKING AND DECLARATION OF CONFORMITY
1.5. SPECIFICATIONS OF THE MACHINE
1.6. BREAK-IN OPERATION
1.7. SPARE PARTS AND SERVICE
1.8. COPYRIGHT
1.9. DRIVING LICENSE
1.10. IDENTIFICATION PLATES
1.10.1. LOCATION OF THE MACHINE ID PLATE
1.10.2. LOCATION OF ENGINE PLATES
1.10.3. MAIN COMPONENT PLATES
2. SAFETY
2.1. GENERAL PRECAUTIONS
2.1.1. OPERATORS MUST HAVE CERTAIN QUALIFICATIONS
2.1.2. OBSERVE ALL SAFETY RULES ON-SITE
2.1.3. INSTALL ALL GUARDS AND SAFETY DEVICES
2.1.4. WEAR PROTECTIVE CLOTHES AND SAFETY EQUIPMENT
2.1.5. MODIFICATIONS
2.1.6. DO NOT MODIFY THE ENGINE
2.1.7. HANDLING ELECTRIC ACCESSORIES
2.1.8. BEFORE LEAVING THE MACHINE
2.1.9. USE HANDRAILS AND FOOTHOLDS TO GETTING ON/OFF THE MACHINE
2.1.10. DO NOT ALLOW FIRE NEAR FUEL AND OIL
2.1.11. PAY ATTENTION TO HOT FLUID
2.1.12. DO NOT INHALE DUST CONTAINING ASBESTOS
2.1.13. PAY ATTENTION TO MOVING PARTS
2.1.14. MACHINE FIRE EXTINGUISHER AND FIRST-AID KIT
2.1.15. PROTECTION FROM FALLING OR FLYING OBJECTS
2.1.16. BEFORE WORKING IN THE VICINITY OF GAS LINES
2.1.17. PRECAUTIONS FOR OPTIONAL WORKING ATTACHMENTS
2.1.18. DO NOT REMOVE FRONT ATTACHMENT OR COUNTERWEIGHT
2.1.19. PRECAUTIONS FOR POLYMERS AND ELASTOMERS
2.1.20. HANDLING OF ACCUMULATOR
2.2. PRECAUTIONS DURING OPERATION
2.2.1. BEFORE STARTING THE ENGINE
2.2.2. AFTER STARTING THE ENGINE
2.2.3. PRECAUTIONS DURING TRAVELING
2.2.4. TRANSPORTATION
2.2.5. BATTERY
2.2.6. TOWING
2.2.7. LIFTING OBJECTS
2.3. PRECAUTIONS FOR MAINTENANCE
2.3.1. BEFORE MAINTENANCE
2.3.2. DURING MAINTENANCE
2.4. LOCATIONS OF SAFETY LABELS
2.4.1. LOCATIONS OF ATTACHED LABELS
2.4.2. CONTENTS OF SAFETY DECALS
3. DESCRIPTION
3.1. LOCATIONS OF MAIN PARTS
3.2. DETAILS OF OPERATOR’S CAB
3.3. INSTRUMENT PANEL
3.4. MENU ITEMS
3.4.1. LANGUAGE
3.4.2. STATUS INFO
3.4.3. WORKING HOURS
3.4.4. MAINTENANCE
3.4.5. FAILURES
3.4.6. MACHINE INFORMATION
3.4.7. SETTINGS
3.5. MEDIA
3.5.1. RADIO
3.5.2. USB
3.5.3. AUX
3.6. OPERA INSTRUMENT PANEL
3.7. USB / AUX CONNECTIONS
3.8. EXTERNAL SOCKET (12V)
3.9. STARTER KEY
3.10. CUP HOLDER / ASHTRAY
3.11. CONVENIENT STORAGE
3.12. CONVENIENT STORAGE BOX
3.13. SWITCHES
3.14. SAFETY LOCKING DEVICE
3.15. ADJUSTING ARMREST HEIGHT
3.16. ARMREST ANGLE ADJUSTMENT
3.17. CONSOLE ANGLE ADJUSTING LEVERS
3.18. LEFT CONSOLE LIFTING LEVER
3.19. LEVERS
3.19.1. ATTACHMENT CONTROL LEVER
3.19.2. ATTACHMENT CONTROL LEVER (PROPORTIONAL CONTROL) (OPTIONAL)
3.19.3. TRAVEL PEDAL / LEVER
3.20. FUSE / RELAY BOX
3.21. AUTOMATIC/MANUAL MODE SWITCH
3.22. BATTERY RELAY
3.23. BATTERY MASTER SWITCH
3.24. HEATER AND AIR CONDITIONER
3.24.1. HEATER AND AIR CONDITIONER VENTS
3.24.2. CONTROL UNIT
3.25. LIGHTER
3.26. BOTTLE HOLDER
3.27. COOL BOX
3.28. CONVENIENT STORAGE AND CONVENIENT STORAGE BOX
3.29. EMERGENCY EXIT
3.30. FIRST-AID KIT
3.31. FRONT WINDSHIELD
3.32. DOOR
3.33. DOOR LOCK MECHANISM
3.34. SIDE WINDOW
3.35. FIRE EXTINGUISHER (OPTIONAL)
3.36. FRONT AND REAR CURTAINS
3.37. SUNROOF
3.38. SUN SHADE
3.39. OPERATOR’S CAB INTERIOR LIGHTING
3.40. ADJUSTING MIRRORS
3.41. OPERATOR’S SEAT ADJUSTMENT
3.42. SEAT BELT
3.42.1. FASTENING THE SEAT BELT
3.42.2. ADJUSTING LENGTH OF THE BELT
4. OPERATION
4.1. INSPECTIONS BEFORE STARTING THE ENGINE
4.2. STARTING THE ENGINE
4.2.1. STARTING AT NORMAL TEMPERATURE
4.2.2. STARTING IN COLD WEATHER
4.3. WARM-UP OPERATION
4.3.1. AUTOMATIC WARM-UP OPERATION
4.3.2. WARMING-UP HYDRAULICS
4.4. INSPECTIONS AFTER STARTING THE ENGINE
4.4.1. ENGINE OIL PRESSURE
4.4.2. ENGINE WARNING LIGHT
4.4.3. BATTERY CHARGE WARNING LAMP
4.4.4. ENGINE TEMPERATURE GAUGE
4.4.5. HYDRAULIC OIL TEMPERATURE GAUGE
4.4.6. FUEL LEVEL GAUGE
4.4.7. AIR CLEANER IS CLOGGED INDICATOR
4.4.8. AUTO WARM UP INDICATOR
4.4.9. REDUCED ENGINE POWER INDICATOR LIGHT
4.4.10. ABNORMAL NOISE OF ENGINE AND COLOR OF EXHAUST SMOKE
4.4.11. COOLANT TEMPERATURE
4.4.12. HOUR METER (CUMULATIVE OPERATING HOUR COUNTER)
4.4.13. BE CAREFUL WITH THE TOO COLD ENGINE
4.4.14. WHEN THE WARNING LIGHT COMES ON
4.4.15. WHEN THE ENGINE COOLANT IS HOT
4.5. OPERATING THE MACHINE
4.5.1. FORWARD TRAVEL
4.6. TRAVEL DIRECTION CONTROL
4.7. STOPPING AND PARKING THE MACHINE
4.8. SWINGING THE MACHINE
4.9. OPERATING ATTACHMENTS
4.10. PROHIBITIONS DURING OPERATION
4.11. PRECAUTIONS DURING OPERATION
4.11.1. CHECKING THE TRAVEL UNIT REDUCTION GEAR OIL
4.12. PRECAUTIONS WHEN TRAVELING ON A SLOPE
4.13. RESCUING THE MACHINE FROM SWAMP
4.13.1. IF ONE TRACK IS STUCK
4.13.2. IF BOTH TRACKS ARE STUCK
4.14. ADDITIONAL WORKS USING HYDRAULIC EXCAVATORS
4.14.1. BACKHOE WORK
4.14.2. SHOVELING
4.14.3. DITCHING
4.14.4. LOADING
4.15. LIFTING
4.16. REPLACING THE BUCKET
4.17. PARKING THE MACHINE
4.18. CHECKS AFTER FINISHING WORK
4.19. STOPPING THE ENGINE
4.20. INSPECTION AFTER STOPPING THE ENGINE
4.21. HANDLING THE ENGINE WITH TURBOCHARGER
4.21.1. PRECAUTIONS DURING STARTING THE ENGINE
4.21.2. PRECAUTIONS DURING STOPPING THE ENGINE
4.22. LOCKING SYSTEM
4.23. TRANSPORTATION
4.23.1. LOADING AND UNLOADING
4.23.2. PRECAUTIONS ON LOADING
4.23.3. PRECAUTIONS ON TRANSPORTATION
4.23.4. LIFTING THE MACHINE
4.23.5. SEA TRANSPORTATION
4.24. PREPARING THE MACHINE BASED ON WEATHER CONDITIONS
4.24.1. HANDLING THE MACHINE IN COLD WEATHER
4.24.2. PREPARATIONS FOR COLD WEATHER
4.24.3. PRECAUTIONS AFTER FINISHING WORK
4.24.4. PREPARATIONS FOR HOT WEATHER
4.25. LONG TERM STORAGE
4.25.1. BEFORE LONG TERM STORAGE
4.25.2. DURING LONG TERM STORAGE
4.25.3. END OF LONG TERM STORAGE
4.26. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION
5. TROUBLESHOOTING
5.1. WHEN TO SUSPECT A TROUBLE CASE
5.2. TOWING METHOD
5.2.1. RELEASING PARKING BRAKE
5.3. TOWING HOLE FOR LIGHT OBJECTS
5.4. PRECAUTIONS UNDER SPECIAL CIRCUMSTANCES
5.5. ELECTRIC DISCHARGE
5.5.1. STARTING THE ENGINE WITH BOOSTER CABLES (JUMP START)
5.6. POOR BATTERY CHARGING
5.7. OVERHEATING
5.8. ABNORMAL (LOW) OIL PRESSURE
5.9. ENGINE TROUBLE
5.10. HYDRAULIC SYSTEM
5.10.1. HYDRAULIC PUMP
5.10.2. TRAVELING, SWINGING AND ATTACHMENTS
5.10.3. HYDRAULIC CYLINDERS
5.11. ELECTRICAL SYSTEM
5.12. OTHER TROUBLES
6. MAINTENANCE
6.1. PRECAUTIONS FOR MAINTENANCE
6.1.1. HIDROMEK GENUINE SPARE PARTS
6.1.2. WINDOW WASHER FLUID
6.1.3. OIL AND GREASE
6.1.4. NEVER MIX OILS
6.1.5. CHECK HOUR METER
6.1.6. KEEP THE MACHINE CLEAN
6.1.7. CAUTIONS FOR HOT OIL AND WATER
6.1.8. CHECK FILTER
6.1.9. CAUTIONS WHEN ADDING OIL
6.1.10. KEEP CONTAMINATION AWAY
6.1.11. ATTACH WARNING TAG
6.1.12. OBSERVE ALL WARNINGS AND CAUTIONS
6.1.13. PRECAUTIONS WHEN WELDING
6.1.14. PRECAUTIONS ON FIRE
6.1.15. CLEANING MACHINED SURFACES
6.1.16. CHECKING THE TRACK
6.1.17. PRECAUTIONS WHEN WASHING THE MACHINE
6.1.18. CHECK BEFORE AND AFTER WORK
6.1.19. PRECAUTIONS DURING WORK IN DUSTY CONDITIONS
6.1.20. DISCARDED PARTS, OILS AND OTHER LIQUIDS
6.1.21. HIDROMEK RECOMMENDED OILS AND GREASE
6.1.22. OIL
6.1.23. FUEL
6.1.24. COOLANT
6.1.25. GREASE
6.1.26. STORING OIL AND FUEL
6.1.27. FILTERS
6.1.28. ELECTRONIC PARTS
6.1.29. HYDRAULIC SYSTEM
6.2. OIL, FUEL, COOLANT AND DIESEL EXHAUST FLUID
6.2.1. CAPACITIES OF OIL, FUEL, COOLANT
6.2.2. RECOMMENDED OIL, GREASE AND COOLANT
6.2.3. ENGINE OIL
6.2.4. RECOMMENDED FUEL
6.2.5. COOLANT
6.3. PERIODIC REPLACEMENT OF MAIN PARTS
6.4. INSPECTION AND MAINTENANCE LIST
6.5. EVERY 10 HOURS (BEFORE STARTING)
6.5.1. WALK-AROUND INSPECTION (VISUAL INSPECTION)
6.5.2. INSPECTING ENGINE STARTABILITY AND ABNORMAL NOISE
6.5.3. INSPECTING CONDITION OF THE ENGINE AT LOW SPEEDS AND DURING ACCELERATION
6.5.4. COOLANT LEVEL CHECK
6.5.5. ENGINE OIL LEVEL CHECK
6.5.6. FUEL LEVEL CHECK
6.5.7. HYDRAULIC OIL LEVEL CHECK
6.5.8. ELECTRIC WIRING CHECK
6.5.9. CLEANING THE FILTER OF HYDRAULIC TANK BREATHER
6.5.10. CHECKING AND REPLACING THE BUCKET TEETH
6.5.11. FAN BELT
6.5.12. GREASING ATTACHMENT PINS
6.5.13. TIGHTENING TRACK SHOE BOLT
6.5.14. DRAINING SEDIMENT AND WATER FROM FUEL FILTERS
6.6. EVERY 10 HOURS (AFTER WORKSHIFT)
6.6.1. CLEANING THE MACHINE
6.7. EVERY 50 HOURS (WEEKLY SERVICE)
6.7.1. GREASING SWING GEAR BEARING (at 3 points)
6.7.2. REMOVING SEDIMENT FROM FUEL TANK
6.7.3. INSPECTING AND ADJUSTING TRACK TENSION
6.8. FIRST 250 HOURS
6.8.1. REPLACING HYDRAULIC RETURN FILTER ELEMENT OF HYDRAULIC OIL
6.8.2. CHANGING PILOT FILTER ELEMENT
6.8.3. GREASING SWING UNIT REDUCTION GEAR
6.8.4. REPLACING SWING UNIT REDUCTION GEAR OIL
6.9. EVERY 250 HOURS (MONTHLY SERVICE)
6.9.1. CHECKING SWING RING GEAR GREASE
6.9.2. CHANGING SWING GEAR BEARING GREASE (at 3 points)
6.9.3. CHECKING BATTERY ELECTROLYTE LEVEL
6.10. EVERY 250 HYDRAULIC BREAKER HOURS
6.10.1. REPLACING HYDRAULIC BREAKER RETURN LINE FILTER (IF EXISTS)
6.11. FIRST 500 HOURS
6.11.1. REPLACING TRAVEL UNIT REDUCTION GEAR OIL
6.12. EVERY 500 HOURS (3 – MONTH SERVICE)
6.12.1. CHANGING FUEL FILTER ELEMENTS
6.12.2. REPLACING ENGINE OIL AND OIL FILTER
6.12.3. REPLACING THE OIL FILTER
6.12.4. CLEANING SUPPLY PUMP STRAINER
6.12.5. CLEANING ELECTROMAGNETIC PUMP FILTER (IF EXIST)
6.12.6. CHECKING ANTIFREEZE DENSITY
6.12.7. CHECKING AND CLEANING RADIATOR, OIL COOLER AND CONDENSER FIN
6.12.8. REPLACING AIR CONDITIONER FILTERS
6.12.9. OPERATOR CAB FILTER
6.12.10. GREASING SWING UNIT REDUCTION GEAR
6.13. EVERY 1000 HOURS (6-MONTHS SERVICE)
6.13.1. REPLACING SWING UNIT REDUCTION GEAR OIL
6.13.2. REPLACING PILOT FILTER ELEMENT
6.13.3. REPLACING TRAVEL UNIT REDUCTION GEAR OIL
6.13.4. REPLACING THE RETURN FILTER ELEMENT OF HYDRAULIC OIL
6.13.5. ENGINE VALVE CLEARANCE CHECK
6.13.6. STARTER AND ALTERNATOR CHECK AND CLEANING
6.13.7. CYLINDER COMPRESSION CHECK
6.13.8. TENSION ADJUSTMENT OF AIR CONDITIONER BELT
6.13.9. CHANGING THE FILTER ELEMENT OF HYDRAULIC TANK BREATHER
6.14. EVERY 1500 HOURS
6.14.1. INSPECTING AND CLEANING THE EGR VALVE
6.14.2. INSPECTING AND CLEANING THE EGR LEAD VALVE
6.14.3. INSPECTING AND CLEANING THE EGR COOLER
6.14.4. INSPECTING THE TURBOCHARGER
6.15. EVERY 2000 HOURS (ANNUAL SERVICE)
6.15.1. REPLACING THE OIL AND CLEANING OR REPLACING THE SUCTION STRAINER OF HYDRAULIC TANK
6.16. EVERY TWO YEARS OF SERVICE
6.16.1. CLEANING COOLING SYSTEM AND REPLACING COOLANT
6.17. WHEN REQUIRED
6.17.1. FILLING FUEL (FUEL TRANSFER PUMP)
6.17.2. REPLACING OR IF NECESSARY CLEANING AIR FILTER OUTER ELEMENT
6.17.3. BLEEDING FUEL SYSTEM
6.17.4. BLEEDING HYDRAULIC SYSTEM
6.17.5. REPLACEMENT OF THE FUEL PIPING
6.17.6. CHECKING AIR CONDITIONER REFRIGERANT AMOUNT
7. SPECIFICATIONS
7.1. TECHNICAL SPECIFICATIONS OF HMK 200 C-3A, HMK 210 LC-3A
7.2. TECHNICAL SPECIFICATIONS OF HMK 230 LC-3A, HMK 230 NLC-3A, HMK 230 LC LR-3A AND HMK 230 LC SLR-3A
7.3. TECHNICAL SPECIFICATIONS OF HMK 310 LC-3A, HMK 310 NLC-3A, HMK 310 LC LR-3A
7.4. TECHNICAL SPECIFICATIONS OF HMK 360 LC-3A
7.5. TECHNICAL SPECIFICATIONS OF HMK 390 LC-3A, HMK 390 NLC-3A, HMK 390 LC LR-3A
7.6. TECHNICAL SPECIFICATIONS OF HMK 410 LC-3A
8. ATTACHMENTS AND OPTIONS
8.1. GENERAL PRECAUTIONS
8.2. PRECAUTIONS WHEN FITTING THE WORK EQUIPMENT
8.3. SELECTION OF ATTACHMENT
8.3.1. TECHNICAL SPECIFICATIONS FOR ATTACHMENTS
8.4. PROTECTION AGAINST FALLING OR FLYING OBJECTS (FOPS)
8.5. PROTECTION AGAINST TIPPING AND ROLLING OVER
8.6. SELECTION OF TRACK SHOES
8.6.1. METHOD OF SHOE SELECTION
8.7. HYDRAULIC BREAKERS
8.7.1. PERMISSIBLE WORKS
8.7.2. INCORRECT OPERATION METHODS
8.7.3. MAINTENANCE FOR HYDRAULIC BREAKER
8.7.4. WORKING IN THE TUNNEL
8.8. QUICK COUPLING ATTACHMENT (OPTIONAL)
8.8.1. PREPARATION FOR MOUNTING AND DISMOUNTING
8.9. AUTOMATIC GREASING SYSTEM (IF EQUIPPED)
8.9.1. OPERATION OF THE SYSTEM
8.9.2. GREASING PERIODS AND ADJUSTMENTS DEPENDING ON WORKING CONDITIONS
8.9.3. TESTING THE SYSTEM
8.9.4. GREASING RECOMMENDATIONS
8.9.5. FILLING THE TANK
8.9.6. PERIODIC CONTROLS
8.9.7. REMOVAL OF AIR FROM THE GREASING SYSTEM
9. APPENDIX
9.1. HAND SIGNALS
9.2. COMMUNICATION INFORMATION
9.2.1. PLANTS AND AFTER SALES SERVICES
10. ALPHABETICAL INDEX

www.themanualsgroup.com
Download Information 📩: The PDF manual will be emailed to you after your order has been processed by our sales team.