Download Hidromek Wheel Excavator HMK140W-3 HMK210W-3 Operation Maintenance Manual H23732B401 PDF ( English )

Access the official Operation and Maintenance Manual for the Hidromek HMK140W-3 and HMK210W-3 wheel excavator series (Part Number: H23732B401). This comprehensive digital PDF guide is essential for equipment operators, service technicians, and fleet managers. It covers critical safety protocols, pre-start checks, routine service schedules, fluid capacities, operating techniques, and troubleshooting instructions to maximize machine efficiency, reliability, and lifespan. Ensure optimal performance with this factory-authorized manual. Instant download available. www.themanualsgroup.com

MODEL COVERED :
Hidromek HMK140W-3 HMK210W-3 Wheel Excavator

CONTENTS INCLUDED :
INTRODUCTION
1.1. FOREWORD
1.2. SAFETY INFORMATION
1.3. DESCRIPTION AND INTENDED USE
1.4. CE MARKING AND DECLARATION OF CONFORMITY
1.5. CHARACTERISTICS OF THE MACHINE
1.6. EXHAUST EMISSION REGULATION RELATED PARTS
1.7. BREAK-IN OPERATION
1.8. SPARE PARTS AND SERVICE
1.9. COPYRIGHT
1.10. DRIVING LICENSE
1.11. IDENTIFICATION PLATES
1.12. MAIN COMPONENTS PLATES
2. SAFETY
2.1. GENERAL CAUTION
2.2. CAUTION DURING OPERATING
2.3. CAUTION ON MAINTENANCE
2.4. ATTACHED POSITIONS SAFETY LABEL
3. DESCRIPTION
3.1. LOCATION OF MAIN PARTS
3.2. DETAIL OF OPERATOR’S CAB
3.3. INSTRUMENT PANEL
3.4. MENU ITEMS
3.5. MEDIA
3.6. OPERA INSTRUMENT PANEL
3.7. USB / AUX CONNECTIONS
3.8. EXTERNAL SOCKET (12 V)
3.9. STARTER KEY
3.10. CUP HOLDER / ASH TRAY
3.11. CONVENIENT STORAGE
3.12. CONVENIENT STORAGE BOX
3.13. SWITCHES
3.14. DOZER BLADE AND OUTRIGGER CONTROL LEVER
3.15. STEERING
3.16. SAFETY LOCKING DEVICE
3.17. ADJUSTING ARMREST HEIGHT
3.18. ARMREST ANGLE ADJUSTMENT
3.19. CONSOLE ANGLE ADJUSTING LEVERS
3.20. LEFT CONSOLE LIFTING LEVER
3.21. LEVERS
3.22. SWING LOCK
3.23. ACCELERATOR AND BRAKE PEDALS
3.24. FUSE / RELAY BOX
3.25. AUTOMATIC/MANUAL MODE SWITCH
3.26. BATTERY RELAY
3.27. BATTERY MASTER SWITCH
3.28. HEATER AND AIR CONDITION
3.29. LIGHTER
3.30. BOTTLE HOLDER
3.31. COOL BOX
3.32. CONVENIENT STORAGE AND CONVENIENT STORAGE BOX
3.33. EMERGENCY EXIT
3.34. FIRST-AID KIT
3.35. FRONT WINDSHIELD
3.36. DOOR
3.37. DOOR LOCK MECHANISM
3.38. SIDE WINDOW
3.39. FIRE EXTINGUISHER (OPTIONAL)
3.40. FRONT AND REAR CURTAIN
3.41. SUNROOF
3.42. SUN SHADE
3.43. OPERATOR’S CAB INTERIOR LIGHTING
3.44. ADJUSTING MIRRORS
3.45. OPERATOR’S SEAT ADJUSTMENT
3.46. SEAT BELT
4. OPERATION
4.1. INSPECTIONS BEFORE STARTING THE ENGINE
4.2. STARTING THE ENGINE
4.3. WARM-UP OPERATION
4.4. INSPECTIONS AFTER STARTING THE ENGINE
4.5. OPERATING THE MACHINE
4.6. TRAVEL DIRECTION CONTROL
4.7. SWINGING THE MACHINE
4.8. OPERATING ATTACHMENTS
4.9. OPERATING DOZER BLADE AND OUTRIGGERS
4.10. CRUISE FUNCTION
4.11. PROHIBITIONS DURING OPERATION
4.12. CAUTIONS DURING OPERATION
4.13. CAUTIONS WHEN TRAVELING ON A SLOPE
4.14. ADDITIONAL WORKS USING HYDRAULIC EXCAVATORS
4.15. LIFTING
4.16. REPLACING THE BUCKET
4.17. CHECKS AFTER FINISHING WORK
4.18. STOPPING THE ENGINE
4.19. CHECK AFTER STOPPING THE ENGINE
4.20. HANDLING THE ENGINE WITH TURBOCHARGER
4.21. LOCKING SYSTEM
4.22. TRANSPORTATION
4.23. PREPARING THE MACHINE BASED ON WEATHER CONDITIONS
4.24. LONG TERM STORAGE
4.25. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION
5. TROUBLESHOOTING
5.1. WHEN TO SUSPECT A TROUBLE CASE
5.2. CAUTIONS UNDER SPECIAL CIRCUMSTANCES
5.3. TOWING METHOD
5.4. ELECTRIC DISCHARGE
5.5. POOR BATTERY CHARGING
5.6. OVERHEATING
5.7. ABNORMAL (LOW) OIL PRESSURE
5.8. ENGINE
5.9. HYDRAULIC SYSTEM
5.10. ELECTRIC SYSTEM
5.11. OTHER TROUBLES
6. MAINTENANCE
6.1. CAUTIONS IN MAINTENANCE
6.2. OIL, FUEL, COOLANT AND DIESEL EXHAUST FLUID
6.3. PERIODIC REPLACEMENT OF MAIN PARTS
6.4. INSPECTION AND MAINTENANCE LIST
6.5. EVERY 10 HOURS (BEFORE STARTING)
6.6. EVERY 50 HOURS (WEEKLY SERVICE)
6.7. FIRST 250 HOURS
6.8. EVERY 250 HOURS (MONTHLY SERVICE)
6.9. EVERY 250 HOURS HYDRAULIC BREAKER HOURS
6.10. EVERY 500 HOURS (3 – MONTH SERVICE)
6.11. EVERY 1000 HOURS (6 MONTHS SERVICE)
6.12. EVERY 1500 HOURS
6.13. EVERY 2000 HOURS (ANNUALLY) SERVICE
6.14. EVERY TWO YEARS OF SERVICE
6.15. WHEN REQUIRED
7. SPECIFICATIONS
7.1. TECHNICAL SPECIFICATIONS OF HMK 140 W-3
7.2. TECHNICAL SPECIFICATIONS OF HMK 210 W-3
8. EQUIPMENT AND ATTACHMENTS
8.1. GENERAL PRECAUTIONS
8.2. CAUTION WHEN FITTING THE WORKING EQUIPMENT
8.3. SELECTION OF ATTACHMENT
8.4. PROTECTION AGAINST FALLING OR FLYING OBJECTS (FOPS)
8.5. PROTECTION AGAINST TIPPING AND ROLLING OVER
8.6. HANDLING TIRES
8.7. HYDRAULIC BREAKER
8.8. QUICK COUPLING ATTACHMENT (OPTIONAL)
9. APPENDIX
9.1. HAND SIGNALS
9.2. CONTACTS
10. ALPHABETICAL INDEX

www.themanualsgroup.com
Download Information 📩: The PDF manual will be emailed to you after your order has been processed by our sales team.