Download Hidromek Wheel Loader HMK635WL-5 Stage 5 Operation Manual L217200401 2026 PDF ( English )

Master safe operation, daily pre-start inspections, and advanced control features for your heavy machinery with the official Hidromek HMK635WL-5 Stage 5 Operation Manual (Part Number: L217200401, 2026 Edition). Delivered in an accessible, high-resolution digital PDF format, this comprehensive operator's guide is tailored for equipment owners, fleet managers, professional operators, and site supervisors who demand clear, authoritative instructions. www.themanualsgroup.com

MODEL COVERED :
Hidromek HMK635WL-5 Stage 5 Wheel Loader

CONTENTS INCLUDED :
INTRODUCTION
GENERAL INFORMATION
CE, UKCA MARKING, DECLARATION OF CONFORMITY AND EMC DIRECTIVE
BEFORE STARTING OPERATION AND MAINTENANCE
DRIVING LICENSE
COPYRIGHT
SAFETY INFORMATION
SPARE PARTS ORDERING PROCEDURE
FRONT / REAR, LEFT / RIGHT DIRECTIONS OF MACHINE
INTENDED USE OF MACHINE
VISIBILITY FROM OPERATOR’S SEAT
LOCATIONS OF MACHINE AND ENGINE ID PLATES
PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
AB/EPA REGULATION, ENGINE INFORMATION PLATE
TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR INFORMATION
WORK SAFETY
SAFETY LABELS
LOCATIONS OF SAFETY LABELS
EXPLANATION OF SAFETY LABELS
PRECAUTIONS DURING OPERATION AND MAINTENANCE
PRECAUTIONS BEFORE OPERATION
PREPARATIONS FOR SAFE OPERATION
FIRE PREVENTION
PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
UNAUTHORIZED MODIFICATIONS
PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
PRECAUTIONS WHEN RUNNING ENGINE INDOORS
PRECAUTIONS DURING OPERATION
PRECAUTIONS ON JOBSITE
STARTING ENGINE
OPERATION
TRANSPORTATION OF MACHINE
TOWING MACHINE
PRECAUTIONS FOR MAINTENANCE
PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
PRECAUTIONS FOR INSPECTION AND MAINTENANCE
TIRES
DESCRIPTION
GETTING TO KNOW OUR MACHINE
GENERAL VIEW OF MACHINE
REAR VIEW
RIGHT SIDE VIEW
LEFT SIDE VIEW
GENERAL VIEW OF CONTROLS AND GAUGES
EXPLANATION OF CONTROLS AND GAUGES
MONITOR PANEL
RIGHT CONSOLE
STANDARD RIGHT CONSOLE
SINGLE JOYSTICK (Optional)
COMFORTABLE DRIVING SYSTEM (Optional)
FNR (DIRECTIONAL) LEVER
WIPER LEVER
SIDE PANEL
MENUS
SWITCHES/BUTTONS (SIDE CONSOLE)
STEERING WHEEL ADJUST LEVER
BRAKE PEDALS
ACCELERATOR PEDAL
STARTING KEY
ARM REST
LOCKED CAPS
FRAME LOCK BAR
TOWING PIN
BATTERY DISCONNECT SWITCH
ENGINE HOOD TILTING BUTTON
BACK-UP ALARM
OPERATION OF OPERATOR’S CAB TILTING FUNCTION
FUSES
TOOL BOX
FIRE EXTINGUISHER (IF AVAILABLE)
EMERGENCY EXIT
POWER OUTLET
AUX INLET
USB INLET
OPERATION
CHECKS BEFORE STARTING ENGINE, ADJUSTMENTS
WALK-AROUND CHECK AND VISUAL INSPECTION
CHECK BEFORE STARTING
SEAT ADJUSTMENT
ADJUSTING SEAT BELT
ADJUSTING MIRRORS
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
STARTING ENGINE
OPERATIONS AND CHECKS AFTER STARTING ENGINE
BREAK-IN MACHINE
NORMAL OPERATION
MOVING THE MACHINE (DIRECTION, SPEED), STOPPING MACHINE
PREPARATIONS FOR MOVING MACHINE
CHANGING GEAR SPEED
CHANGING DIRECTION
STOPPING MACHINE
AUTOMATIC TRANSMISSION CUT-OFF FUNCTION
STEERING MACHINE
EMERGENCY STEERING SYSTEM
OPERATION OF WORK EQUIPMENT
RIGHT CONSOLE WITH THREE CONTROL LEVER
SINGLE JOYSTICK RIGHT CONSOLE (OPTIONAL)
STOPPING ENGINE
CHECKS AFTER STOPPING ENGINE
EXHAUST GAS AFTERTREATMENT SYSTEM
REGENERATION
DIESEL PARTICLE FILTER (DPF) WARNING LEVEL
DEF/AdBlue® WARNINGS
SCR SYSTEM FAULT WARNINGS
OPERATIONS THAT CAN BE DONE WITH WHEEL LOADER
DIGGING OPERATIONS
LOADING PILED SOIL OR BLASTED ROCK
DIGGING AND LOADING ON LEVEL GROUND
LEVELING OPERATIONS
PUSHING OPERATION
LOAD AND CARRY OPERATIONS
LOADING OPERATIONS
CROSS DRIVE LOADING
V-TYPE LOADING
PRECAUTIONS WHEN PILING UP MATERIALS
PRECAUTIONS WHEN HANDLING BLASTED ROCK
OPERATING TECHNIQUES TO PREVENT DAMAGE TO MACHINE
PRECAUTIONS FOR OPERATION
PERMISSIBLE WATER DEPTH FOR OPERATION
WHEN WHEEL BRAKE DOES NOT WORK
PRECAUTIONS WHEN DRIVING UP OR DOWN SLOPES
PRECAUTIONS WHEN DRIVING MACHINE
REMOVAL AND INSTALLATION OF BUCKET
PARKING MACHINE
CHECKS AFTER COMPLETION OF OPERATION
LOCKING
TIRE MAINTENANCE
TRANSPORTATION
TRANSPORTATION PROCEDURE
LOADING AND UNLOADING WORK
INSTRUCTIONS FOR SLING USAGE
MACHINE LIFTING METHOD
COLD WEATHER OPERATION
PRECAUTIONS FOR LOW TEMPERATURE
PRECAUTIONS AFTER COMPLETION OF WORK
AFTER COLD WEATHER
LONG-TERM STORAGE
BEFORE STORAGE
DURING STORAGE
AFTER STORAGE
INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION
TROUBLESHOOTING
WHEN MACHINE RUNS OUT OF FUEL
METHOD OF TOWING MACHINE
STARTING ENGINE WITH BOOSTER CABLES
METHOD FOR LOWERING WORK EQUIPMENT WHEN ENGINE HAS STOPPED
TROUBLESHOOTING
MAINTENANCE
MAINTENANCE RULES
SERVICE METER READING
HÄ°DROMEK GENUINE REPLACEMENT PARTS
HÄ°DROMEK GENUINE OIL
ALWAYS USE CLEAN WASHER FLUID
ALWAYS USE CLEAN OIL AND GREASE
CHECKING FOR FOREIGN MATERIALS IN DRAINED OIL AND ON FILTERS
PRECAUTIONS WHEN ADDING OIL OR FUEL
WELDING INSTRUCTIONS
DO NOT DROP ANYTHING INSIDE MACHINE
DUSTY ENVIRONMENTS
AVOID MIXING DIFFERENT TYPES OR GRADES OF OIL
LOCKING INSPECTION COVERS
BLEEDING AIR FROM HYDRAULIC CIRCUIT
PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES
CHECKS AFTER INSPECTION AND MAINTENANCE
SELECTING FUEL AND OIL ACCORDING TO AMBIENT TEMPERATURE
SECURELY CLOSE ENGINE PANEL
OIL, FUEL, COOLANT
OIL
FUEL
COOLANT
GREASE
DIESEL EXHAUST FLUID (ADBLUE®)
OIL ANALYSIS
OIL SAMPLING
STORING OIL AND FUEL
FILTERS
ELECTRICAL COMPONENTS
STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
TORQUE LIST
PERIODICAL INSPECTION AND MAINTENANCE LIST
PERIODICAL INSPECTION AND MAINTENANCE PROCEDURES
CHECKS BEFORE STARTING
EVERY 10 HOURS MAINTENANCE
EVERY 50 HOURS MAINTENANCE
INITIAL 250 HOUR MAINTENANCE
EVERY 250 HOURS MAINTENANCE
EVERY 500 HOURS MAINTENANCE
EVERY 1000 HOURS MAINTENANCE
EVERY 1500 HOURS MAINTENANCE
EVERY 2000 HOURS MAINTENANCE
EVERY 2 YEAR MAINTENANCE
EVERY 4000 HOURS MAINTENANCE
EVERY 8000 HOURS MAINTENANCE
WHEN REQUIRED
OPTIONAL EQUIPMENT
TECHNICAL SPECIFICATIONS
GENERAL AND WORKING DIMENSIONS
NOISE AND VIBRATION
COMMUNICATION INFORMATION
PLANT AND AFTER SALES SERVICES

www.themanualsgroup.com
Download Information 📩: The PDF manual will be emailed to you after your order has been processed by our sales team.